Ways to Clean Porcelain Tiles

Porcelain is one of the most durable flooring materials that don’t need that much care to look sleek and new. Moreover, these tiling options are also perfectly suitable for heavy use. 

Although it’s true, porcelain is a type of ceramic tile that is particularly hard and has a protective glazed glass coating that resists stain, scratches, and water damage. 

However, some extra care will indeed make these porcelain tiles shine and stay durable for a more extended period of time. 

This article will focus on the ways through which you can keep your elegant porcelain tiles clean and shining. 

Read till the end to get the ultimate guide!

How Frequently Do You Need to Clean Your Porcelain Tiles?

It’s always the best practice to vacuum, sweep, and mop your tiles regularly. But, it entirely depends on how heavy the foot traffic in your room is. Therefore, you might need to go for regular cleaning or after every few days.

You can also keep your floors sparkling through deep cleaning with sanitizer that can remove dirt or any other microscopic particles on the tile. 

Read more House of mosaics.

Things You’ll Be Needing To Clean Your Porcelain Tiles

Equipment Required:

  • Vacuum or broom
  • Mop
  • Mop bucket

Materials Required:

  • Vinegar
  • Dish Soap
  • Baking soda
  • Acrylic stone sealer (only used if the tiles are unglazed)

Cleaning Procedure For All Types of Porcelain Tiles

Porcelain is indeed a strong material, but staining and discoloration can be a significant issue with time. Therefore, these materials need to be looked after with care and delicacy. You also need to monitor for spills and apply sealing treatment annually. 

Unglazed Porcelain Floor Tiles 

1. Damp Mopping

Take warm water and mix it with a few drops of dishwashing solution or soap. Then clean the tire floor with this solution. 

After you are done with the mopping and wiping, don’t immediately pour water on the entire floor as it might penetrate the tiles. Instead, use a clean towel to dry the floor. 

2. Apply Sealing Treatment

You can surely apply an acrylic stone sealer to a well-cleaned unglazed dry floor. This will make the pores of the floor surface water-resistant. 

Yearly, add approximately 1 cup of sealer to around 3 gallons of water after a proper and good cleaning. 

3. Cleaning Grout Lines

The grout lines are the most essential and vulnerable points in the installation process. Even if you don’t seal the tiles; you need to seal the grouts.

You can clean these grout lines easily with equal proportions of water and baking soda by using a small brush. Even if necessary, you can also remove these grout lines and replace them with new ones. 

Glazed Porcelain Tiles

In most cases, the porcelain tiles are protected with a melted glass gaze. This melted glass will act as a thin layer of protection to prevent water from penetrating through the tiles. This can also help the tiles from building up stains on the surface.

You can very easily maintain and clean these tiles, and these also don’t need that much maintenance, and no annual sealing treatments are required.

  1. Vacuum or Sweep

You should always sweep and vacuum your glazed porcelain tiles regularly so that the grit gets removed before it can damage the glaze of your tiles. 

  1. Mop

Mopping can be both natural and chemical. These procedures can be used to shine your porcelain tiles effectively. But make sure that before you start with cleaning, read the instructions provided on your detergent packet. 

  1. Prevent Stains

You should immediately wipe off any stains or dust from these glazed tiles as these might get settled and make a stain if kept for a more extended period of time. 

  1. Clean Stains

A vinegar solution diluted with water can be one of the best cleaners to wipe off stains. You can also use any sort of ceramic cleaners to remove these stains. 

  1. Avoid Damage

While cleaning your glazed porcelain tiles, never use steel wool or stiff bristles to wipe the stains as they might damage your tiles. 

How You Can Deep Clean Your Porcelain Tiles?

Generally, you can keep your porcelain tiles clean by using just a mop and warm water. But you want to clean your tiles deep to make them shinier and bright; these deep cleaning tips can indeed help you. 

  1. Water And Vinegar

With one gallon of warm water, mix ¼ cup of vinegar. If you want, you can also add some sort of oil scents for fragrance. 

  1. Mop Thoroughly

Use this water and vinegar mixture to mop the floor thoroughly.

  1. Rinse

After you are done mopping with the mixture, rinse your entire floor by whipping and cleaning with warm plain water.

  1. Sprinkle Baking Soda

When you have finished cleaning off with plain water, immediately sprinkle baking soda all over the floor.

  1. Mop With Water And Vinegar Solution

Over the sprinkles baking soda, apply water and vinegar solution, and then mop thoroughly. 

  1. Flush Water To Remove Residue

Flush the entire floor with plain and clean water to remove any residue on the floor.

Tips To Keep Your Floors Clean For A Longer Period of Time

  • Wipe off stains immediately, and flush away any sort of residue present. 
  • Most cleaners won’t affect the porcelain tiles, but there are still a few abrasive chemicals that can affect your beautiful tiles. Therefore, always look after the manufacturer’s label before you apply it to your tiles.
  • No matter what, never use steel wool or any other abrasive materials to clean your tiles, as this can affect and damage your porcelain tiles.

I hope this article will help you know how you can keep your porcelain tiles clean and shining!

Share your love
Christophe Rude

Christophe Rude

Articles: 15888

Leave a Reply

Your email address will not be published. Required fields are marked *