Most safes use keys instead of passcodes to open. But what should you do when you lose your keys? Safes are created to withstand tampering in case of a break-in. So, if you misplaced your safe keys, opening them requires an expensive or complicated procedure.
You could use the following options to open a safe if you misplaced your keys.
Contents
Drill a Hole Through a Safe
Drilling should be the last option when you lose your keys. You need to drill the safe into a small hole in a place where the lock within is visible. After drilling, you may open the safe lock using your finger. One of the drawbacks of drilling is that you risk losing your safe. A safe locksmith may be the best person to use to drill.
Use a Paperclip
It is possible to pick a lock using a paperclip. Mostly the digital safes with locks on the rear side have a manual bypass hole at the back. On how to open a safe using a paperclip, insert it via the keyhole after flattening it. Then use a little screwdriver or an extra paper clip below the first one to fasten and twist the lock. Prudently pick and spin the lock mechanism using the first clip. Target the clicking sound that indicates the safe is open.
Using a Nail File
It is used to pick the safe lock as the paperclip. First, insert the sharp end of the nail file into the keyhole. Twist the file round in the keyhole as you press the pin to produce a click sound. Turn round the file on the right side to twist the lock and open the safe after a clicking sound.
Pry It Open
Safe is not totally impenetrable, and there may be enough space to break the latching system and insert a rod. However, this may be the end of your safe as the lock will ultimately be destroyed.
Hammering
You can unlock the safe by continuously hammering the latching mechanism. It may exhaust and disengage the safe, maintaining the locking bar in place. Similarly to prying the safe, this method will leave your safe permanently damaged.
Engage a Safe Locksmith
You may benefit from the technical expertise of an experienced locksmith. A locksmith will use more advanced procedures such as key cutting that will open your safe.
What you need at the moment will determine the safe opening strategy. The locksmith will drill the lock out if you only need to get the safe open and purchase a new one later. Some safes may have coded information that dictates the key blank required on their outer. Such information will make the cutting quick. If the safe has no number and you wish to continue using it, the locksmith will create a new key though the procedure is longer.
Conclusion
In the same way, other things get lost; you may lose your safe keys and be unable to access your documents. Try the methods above on how to open a safe or consult an experienced locksmith.
