Connect with us

home

Difference between MCB, MCCB, ELCB, RCCB, and RCD

Published

on

After having a beautiful house, the primary thing which is required in a home is electricity. The installation of the entire electrical circuit is massive and sometimes cumbersome as well. After installation, we can also witness specific breakage in any particular part of the circuit due to various reasons. But during installation, do we bother about what type of system we are installing? The majority of the answers will be a NO! moving ahead if any breakage appears, we tend to either fix it by ourselves or by any unprofessional who doesn’t have that solid basic knowledge about what is installed.

Reasons for breakage in any circuit:

Whatever circuit system or distribution board is installed, there are specific reasons because of which the breakage in the circuit arises. The first reason is the short circuit, and the second one is overload which is once again a significant cause of circuit breakdown. So as the course of this content proceeds, we are going to elaborate a bit about short circuits and overload.

How and why is there often a short circuit in a board?

A short circuit is a condition where two or more wires get merged which are supplying electricity to their particular route. So if any other wire provides electricity to any unintended path that causes a short circuit, due to this whole process, a tremendous amount of electricity flows throughout the circuit which leads to breakage of the circuit and eventually a short circuit.

Is overload the second reason for disruption in the electricity board?

We all know that there are certain limits to everything in this universe, whether a living thing or a non-living thing. The same thing goes with the electricity board of the house as well. The different DBs are designed in a way to hold a certain level of electricity stress. In some households, stress goes above a level and eventually destroys the quality of appliances and wires in the boards as well. All of these sequences lead to overloading in the board resulting in “overloading”. 

We are now coming to a different electrical circuit breaker category.

We above mentioned some causes due to which an electrical circuit could be damaged. But when there occurs any damage, there must be a remedy to those damages as well. And treatments to those damages are different types of Distribution boards which we are going to talk about in the next section. Before heading towards some broad elaboration or defining them, the types which are MCB, MCCB, ELCB, RCCB, and RCD & their full forms

  • MCB: Miniature Circuit Breaker
  • RCD: Residual current device
  • MCCB: Moulded case circuit Breaker
  • ELCB: Earth Leakage Circuit Breaker
  • RCCB: Residual Current Circuit Breaker

So all these distribution boards which we have mentioned are being installed in different places, and altogether they perform their part to secure and protect the entire circuit. 4- way Distribution boards, MCB distribution boards, and many other distribution boards can be easily found in Legrand (https://www.legrand.co.in) which is indeed the best destination to find all such distribution boards in one place as they are selling some of the best brands for 2020.

Continue Reading
Comments

home

How Do Professionals Clean Your Gutters?

Published

on

By

How Do Professionals Clean Your Gutters?

Everybody loves the fall and spring seasons owing to the pleasant weather conditions. Yet when it comes to spring cleaning or to prepare your house for the winter, homeowners despise one particular task – cleaning out the gutters. It is a menial task that takes up most of a day but is vital for your roof and the foundation’s longevity. Gutters are metallic or plastic half-pipes that run along the edges of your roof to primarily catch the rainwater flowing over the roof (and the debris floating in it) and direct it away from the foundation. Not to paint an unpleasant picture but consider rain gutters to be like the human colon; unless you keep them clean, the waste can cause expensive structural damage to your house.

The Reason why most house owners wish to avoid gutter cleaning is that since the gutters run along the roof edges, it means you need to perch up against a ladder and manually scoop out whatever mulch clogs the gutter. There is a risk of falling from heights, so investing in safety kits such as harnesses, rubber gloves, and an extension pole to reach hard-to-reach places. So, most opt for a professional to manage the gutter cleaning as they have the experience and can clean the gutters quickly for a fee. Depending on the type of debris, professionals use different methods, and we shall look into gutter cleaning for each kind. 

How Professionals Clean your Gutters

Prerequisite Inspection

Before any professional gutter cleaning company or contractor begins working on your gutter, they inspect to understand the approach. The tools used changes as per the following criteria:

  • Gutter length
  • Roof height
  • The current state of your gutter (blocked or choked-up)
  • Gutter size
  • Placement of downspout
  • The type of debris

The most common tools used for gutter cleaning are:

  • Leaf Blower
  • Wet/Dry Vacuum
  • Garden House & Gutter Scooper
  • Plain ol’ Hands and Human Strength
  • Power washer

Professional Gutter Cleaning With a Leaf Blower

When you have dry debris such as leaves, twigs, and the occasional bird feathers, professionals rely on pneumatics (i.e., pressurized air). A leaf blower is powerful enough to set an air stream that can easily dislodge light debris & debris, opening a path for the gutter to work as intended. Modern leaf blowers can be fitted with a nozzle attachment designed to force the air and release as a pressurized air jet. Professional cleaners use the leaf blower to push the debris towards the downspout while being careful not to push the debris into the downspout. The accumulated debris can be picked up manually or vacuumed to be disposed of.

Gutter Cleaning using a Wet/Dry Vacuum

Vacuum cleaners are a great way to suck in dust and dirt off a plain flat surface, but in the case of gutter cleaning, they may be ineffective. Instead, professionals use industrial-sized vacuum machines that pick up heavier debris such as mud or dried up dirt that holds its ground (pun intended) against leaf blowers. Using hoses and curved attachments, professional cleaners can moisten the dirt before vacuuming it up. This makes it easy for them to reach the obstructed gutters without using a ladder. 

Flushing the debris away using Garden Hose

The simplest form of gutter cleaning is when you have very low filth collected in your gutters that can be easily flushed using a garden hose. Starting from the point farthest from the downspout, the worker uses running water to pick up the light-weighted debris and wet the collected dirt. By placing a grill at the downspout area, larger debris such as leaves and twigs are collected while the wastewater flushes down the spout. This type of cleaning can be paired with wet/dry vacuum as well as manual cleaning (explained next). Provided that the gutter is cleaned periodically, the house owner themselves can do this type of cleaning.

Manually cleaning the Gutters by Hand

The most physical work-intensive, and primitive form of cleaning, involves cleaners climbing up a ladder armed with a ladder, bucket, gutter scoop, and heavy-duty work gloves. Large-sized wastes are removed by picking them up by hand or using a gutter scoop. While cleaning manually, professionals also remove the elbow that connects the gutter to the downspout to remove any grime stuck inside. Finally, they flush the gutters and check the flow on the downspout to confirm a clean gutter system.

Nuke ‘em with a Pressure Washer

The most powerful solution available is using a pressure washer to spray everything down. The water jet from the spray nozzle of a power washer is pressurized enough to unroot any dust and grime while being gentle on the gutter surface. Professional cleaners use pressure washing to clear out any obstructions in the downspout. Simply point the nozzle down the downspout and let the water jet breakthrough any obstructions allow the water to run freely through it.

How to detect gutter clogging?

As we mentioned earlier, the purpose of a gutter is to collect the rainwater flowing down the roof and direct them away from the foundation of a house. Failure to do so means water logging either at the downspout or near the foundation. This water can seep inside from the exterior walls. Suppose you notice streak marks on your walls originating from the section near your roof, or the basement feels humid and stuffy after rain. In that case, the chances are that water is accumulated in the gutter and seeping inside.  Similarly, if you observe that water is collected in the garden beds close to your house’s exterior but away from the downspout, it is from overflooded gutters. You can also check it by manually pouring water on your rain gutters.

How often to book a gutter cleaning session

The gutters need to remain unclogged to be efficient, and there is no specific number you can put the finger on when it comes to booking professional gutter cleaning. It depends on the vegetation density in your location and how much rainfall you get round the year. It is good to book one session right before winter begins as leaves tend to shed during the fall season. You can also book one during winter if the gutter tips from the weight of the snow.  Keep a close eye on the lips of the gutter; if it is full, then it’s time to book a pressure washing service.

Wrapping Up

Gutter cleaning is a time-consuming task, but with experienced cleaning contractors such as Aaron’s Pressure Washing, all you need to do is give them a call and leave the work on them. Compared to all other gutter cleaning methods, pressure washing is the most cost-effective and quickest professional cleaning method. Thanks to the pressurized water, you don’t need any other chemicals or cleaning solutions for grime removal. Moreover, due to the pressure, the power washer can be operated from the ground or from a flat surface, eliminating the ladder altogether. 

Continue Reading

home

Decorating Your Walls With Art

Published

on

By

In recent times, wall art has become more critical. The interior designers emphasize wall art as it is one of the best pieces of house decor to improve the house’s appearance.

A few years ago, wall art was primarily neglected and rarely used. After all home accessories were taken care of, it was the final option. But today, we know how wall art could be an excellent opportunity for design. If you still don’t know how to clean up your walls using wall decoration, you may functional wall art want to learn what it is going to do, how it will increase your house decor, and why it is essential for your wall art.

The wall will look beautiful

The suspension of the wall gives you the perfect feel for your room. We all know the dull fence, aren’t we?

Why don’t the wall add color and meaning? Instead of keeping it bland and slow, your living room can be turned into a rare and lively one. You can buy some majestic items by exploring home decoration online shopping.

Improves the whole room

The hanging elements of the wall add freshness and fantastic stuff. The décor of the place. The works of art on the wall can become an excellent subject for conversation. Guests would be delighted by the stunning décor of the tiny living room Articles and can have an immense effect on your guests.

You can decorate your living room or bedroom wall using large glitter canvas wall art, one of your favorite pieces of wall art like Wall Spiegles or Wall Art. You will settle for the work of art that you most attract to. Purchasing home decor items online is fast and convenient. You have to choose the one that fits your home decor carefully.

Show your lifestyle

Through suitable wall art, you can display your personality and lifestyle. Wall art is one of the greatest and easiest ways to show your love and make sure the world knows what kind of person you love, what you want, what you want, and what matters. If you are nuts about music, you can build a musical wall and want it to be encouraging and inspiring all over. There are many home decorations in India online. In a metal wall art finish, you can hang up photographs and portraits of your music idols on the wall. You can also have his picture with fragrance candles, add your personal touch and make your person feel like he’s still around in his family portrait tree. When you love someone more, he’s not with you anymore. Just put, the wall design is your favorite subject.

The décor at home is the voiceless art. It says a great deal about the people here. If you visit somewhere and view car racing pictures on the wall, you will see a fascinating sport. You will know that it is an artist’s or an aspiring artist’s home if you meet cartoons and hand drawings.

Provides texture for the wall

The colors of the interior decoration contribute to the texture and depth of the room. You may create a wall design using some traditional artworks such as hand-painting wall art. You continue to search online for different kinds of decorative items that contain an exclusive texture in your room.

 It also slips into privacy and class, and space through several textures can be more polite and elegant. The 2D painting in the sitting room often adds space and luminosity. To purchase unique works such as sculptures and art in India, we should also consider purchasing paintings, prints, and other decorative pieces inside the bedroom. Another chic look in space that decorators pursue is digital art.

Continue Reading

home

Common Window Measuring Mistakes and How to Avoid Them!

Published

on

window

Dressing up your windows isn’t only about choosing attractive high-quality blinds, shutters or drapes. It also includes getting perfect fit window treatments that look neat and tidy. To achieve this, you have to first get your window measuring right. Also, there are many commonly found window measuring mistakes that kind of destroy the purpose altogether.

Thing with window coverings is that even half a centimeter measured incorrectly can cause huge problems. If you window needs a set of blinds that will be 44 inches, you cannot have them 44.1 inches even. The whole structure will not fit properly. Fitments are made to provide best results when fitted in correct sizes. Especially in case of in windowpane fittings, there is no margin for error.

Here are few of the most common window measuring mistakes that everyone should know about:

Window Measuring Mistake with Mixing Up Height and Width

Although this one sounds very basic, but you’d be surprised to know how many times this happens. Problem isn’t in people not understanding the difference between height and width. It is more related to the way you tell it to your blind’s suppliers or home store people. 

If in your mind, you put height before width, it’d not necessary that person you communicate with does the same. As a general rule, height does go before width but there is no stopping anyone thinking otherwise. Obviously, not many windows are square shaped and this quickly becomes a problem.

How to Avoid?

Be sure to communicate properly with your home store people or blinds sellers. Best case scenario is to write clearly on a piece of paper and show it to the person you communicate with. Eliminate window measuring mistakes and get correctly made blinds for your windows.

Not Using the Correct Measuring Tape

Another very common mistake people make while measuring their windows is to use incorrect or no measuring tape. Tailor measuring tapes that are flimsy, don’t always provide correct measurements. Wooden rulers are big problem creators as well with window measuring.

Flimsy measuring tapes can cause smallest inaccuracies that can in turn become big window measuring mistakes. Whether you are fitting wooden window blinds, rollers, metal blinds or any other smart window coverings, these tiny inaccuracies can make your windows look untidy.

How to Avoid?

Be sure to always use metallic measuring tape. This measuring tape is the best tool you’d have to measure your windows more accurately. Avoid your window measuring mistakes and be sure to use the right tools for the job.

Measuring Previous Blinds and Not the Actual Windows

Another very common mistake is to measure existing or previous windows blinds. Matter of fact, it does make sense for a lot of people to measure blinds instead of the actual space where they would be fitted. However, this is almost never the right approach.

How to Avoid?

Make sure to measure the actual windowpanes necessarily. Avoid window measuring mistakes of taking your old blinds to the home store or blinds sellers as well. Precisely measure your windows with the right tools to get perfect fit coverings.

Ignoring to Measure the Depth

Many windows blinds will need to be fitted inside the frame. Shallow windows that do not have too much depth can have blind protruding. Certain types of blinds including integral blinds that are meant to stick to window glass, also need depth measurements.

To get perfect fittings, you will need to measure depth as well. Most office and workplace windows are made in such a way that they aren’t very deep at all. Walls for workplaces separating rooms and spaces are often very thin.

How to Avoid?

Make sure to measure your window depth as well to get the right fittings. You can leave depth when you have blinds that will fit outside the frames and on the walls. Do not make these window measuring mistakes when your blinds are to be fitted inside window frame.

Measuring in Only Top and Bottom and Not Middle of Windows

When masons work on your windows, they are likely to be off a few centimeters with window designs. It is extremely rare to find perfect squares for windows. Even the slightest deviation in the middle can cause inside fitting blinds to miss the target.

Generally, people make these window measuring mistakes by only measuring the top and bottom. Although this might sound logical, but in reality, there is a lot more to be considered. You need absolutely precise and detailed measurements to get windows blinds just right.

How to Avoid?

When getting your made to measure blinds that fit inside window frames, be sure to measure around three places. These three places would be the top, the middle and the bottom of your windowpane. Measure precisely and don’t miss any part of window. When in doubt, measure on four or five places.

Bottom Line

It is also easy to assume that similar windows are all the same size in large buildings. People make these window measuring mistakes by only having the one window measured. Along with this, there are many other abovementioned mistakes that are commonly found. Avoid your window measuring mistakes and be sure to get perfect fit window blinds or any other treatments. Even the slightest gap can cause creaking blinds or ones that won’t shut properly. Get professional help when needed to get custom perfect fit blinds or window coverings.

Continue Reading

home

What do we mean by smart adhesives?

Published

on

By

In this article, we are going to talk about the importance of smart adhesives and their application in today’s world. Smart adhesives are adhesives that are meant to be placed on a surface and to perform specific functions. In the past, these adhesives were used for craftwork, but today, they are used for all kinds of surfaces and perform in the demanding conditions. 

They help in reducing the friction that is caused when two or more materials touch each other. Smart adhesives have numerous benefits that make them highly useful. We will discuss the benefits of smart adhesives and how they can be beneficial for the craftsman and the homeowner.

Smart adhesives have numerous benefits that make them highly useful in many circumstances

The first benefit of smart adhesives is that they provide a much stronger bond than simple glue. Smart adhesives provide a much stronger bond than typical glue. You can use a single bond as a sealant for your joints; you can use several as a sealant for different joints. Because the adhesives used here are strong, they will not allow moisture to penetrate their surface.

Secondly, adhesives used here can offer chemical resistance. These adhesives will resist the bonding agent from attacking them. This is important because some materials will attack the bonding agent of adhesives, which will weaken the material or object in question. For example, silicone can be attacked by the bonding agent silicone hydrochloride. This will cause the silicone to break down and degrade quickly.

Smart adhesives provide a much stronger bond than many regular types of glue

Another great benefit of smart adhesives is that they offer chemical resistance to various solvents. Some solvents will dissolve the adhesives and materials used with them very quickly. Examples of this include epoxy and polyurethane. Since these solvents can dissolve adhesives, smart materials such as smart adhesives can protect against them and provide a higher degree of resistance to them.

Additionally, smart adhesives are more resistant to the actions that the glue will perform on the surface of the material. This means that if you use regular glue, you may find that the glue will leave a film on the surface of the item. This film can make it difficult for the glue to bond the item together properly, especially when you want to use a strong adhesive. 

With adhesives such as these, you will find that the glue does not leave any type of film on the surface of whatever you are attaching it to. This makes it much easier to make sure that the glue does what it is supposed to do and that the surface of whatever you are attaching it to is protected.

Smart adhesives offer chemical resistance to various solvents, so the glue cannot be dissolved by the use of solvents 

Of course, smart adhesives from https://www.bostik.com/global/en/ can be used in a variety of ways. In fact, they are often used for applications where it is imperative that the material is securely attached to whatever it is being glued to. For instance, if you are working with metal tubing or other such items, you might want to use a glue that contains some type of strengthening agent. That way, if the item were to break, it wouldn’t shatter into pieces. Instead, it would stick together as one piece.

There are plenty of adhesives out there to choose from. Of course, when you are talking about these types of adhesives, it is important to talk about how safe they are and what kind of effect they can have on the substance being used. As you likely know, there are certain substances that cannot be combined with certain others. By using adhesives that are safe to use around these types of substances, you can ensure that you will get the best possible results.

Smart adhesives come in several versions so it’s essential you do your research and find the right smart adhesive for your job

Some of the benefits of smart adhesives may surprise some people. Smart adhesives may be used to form parts that are difficult to do on your own, like gun shells. Also, smart adhesives may be used to form parts that need to be glued into place without requiring any expertise at all. These parts may also be used in a variety of different ways depending on the particular type of adhesive used. Finally, smart adhesives may even be used to help form parts that are difficult to handle but must be done in a certain way.

What do we mean by smart adhesives? Well, it comes down to the bonding agent used. What you are basically looking for is something that can stick to the material being adhered to without coming off in the process. So, it is important to look at what type of bonding agent is being used. Are they simply a glue – water, oil or a mixture of the two? It may even be metal adhesives, such as an alloy that has a particular electrochemical charge.

Continue Reading

home

Can you only burn wood in a concrete fire pit

Published

on

By

The question, “Can you only burn wood in a concrete fire pit?” may seem rhetorical. However, the benefits of a fire pit are not in dispute among experienced fire pits users.

The first and most obvious benefit of using a fire pit is that it allows you to enjoy outdoor space without the need for the space heaters required by outdoor fireplaces. This is the most obvious benefit. However, it goes beyond that. Burning wood or even charcoal in a fire pit provides some of the same benefits that indoor fireplaces offer. They offer a means to contain heat, but they also offer the same amount of cooking options as well.

Concrete fire pits are incredibly versatile so you can burn a host of different materials in them safely.

If you have ever cast into a fire pit on a cold night where you needed to roast marshmallows for dinner, you know the benefits of concrete fire pits. You can get a low heat that will keep your entire family warm and save money on your heating bill. In addition to its monetary benefits, the benefits of concrete fire pit use make them ideal for use as a family fireplace.

You can choose the type of fire pit you would like based on how much you want to spend. If you want to build a fire that offers all of the benefits of an indoor fireplace, you can have one made out of concrete. Concrete fire pits by Dekko.ca come in a wide array of styles. In addition to allowing you to burn wood or charcoal, they also have other benefits such as the ability to shape them to match nearly any landscape. There are even some fire pits that will fit in awkward spaces such as around a door.

Outdoor fireplaces can either be permanent or portable. If you want something that will stay outside all year long, then you might want to consider a permanent outdoor fire pit. These are typically large fire bowls that are heated from the outside. They usually feature a grate and cover, so the fire doesn’t escape. They usually use coal, wood, or gas to heat the fire. However, there are now portable fire pits that can be used for any type of outdoor fire.

The choice of materials to heat the fire in a concrete fire pit  varies and can  include coal, wood, charcoal or even gas.

If you have a small area outdoors, a portable fire pit may be ideal for you. These tend to be smaller than the permanent variety, but they still provide a great deal of heat. However, since they are designed to be lighter, many people opt to buy them because they can be broken down easier. You can also put them in various places where it is harder to build a permanent fire pit such as around a patio or in the corner of a gazebo. While you can’t use concrete fire pits in these areas, you still have the option to use materials that are flammable, such as asphalt or rock.

The most important consideration when you decide to use a wood-burning pit is safety. You want to make sure your children are away from the fire and that they know how to properly get out of the way if they come into contact with anything that is burning. If you want to use a propane fire pit, you need to keep the flame well contained and away from any other things that could catch on fire. It is also a good idea to have a guard or other type of cover over the fire, so no one gets hurt. Remember, always look out for your family.

However, before you burn anything in your fire pit always read the instructions carefully and follow the manufacturer’s advice.

There are many different types of fires. This is why you need to think carefully about which type of fire pit is right for you and your family. If you can’t seem to figure it out, consider hiring a contractor to help you decide what type of fire you should be using. Remember, if you can’t burn wood in a concrete fire pit, there are many other options out there for your home.

So, now you know the answer to the question, “Can you only burn wood in a concrete fire pit?” You need to take some time to think about what you want the pit to be used for and how big or small it needs to be. Also, you need to consider how much money you want to spend on it. Once you have done all that, you can go ahead and get started building your own pit. Just be sure you are very careful when digging your pit and never use any kind of tools that can scratch or chip your pit.

Continue Reading

Trending