Every house owner has faced terrible water damage at least once in their life. Whether it is from a terrible rainfall or a drastic flood, sometimes even a pipe burst could contribute to such a scenario.
In such cases, it is difficult to avail of reliable water damage removal services immediately. Even if you do, who knows how much they will take to lend you their services.
What are you going to do until they arrive, sit idle?
The more you delay the water damage, the more drastic the results would be which is why it is recommended to start taking instant measures.
If you have no idea where to start or what to do then fret not because we have some very helpful DIY water damage removal tips that will surely ease the whole process for you.
Now you don’t have to wait up and watch your furniture getting damage when you can take appropriate measures yourself.
Let’s not delay it more and take a look at our DIY tips’:
Contents
1. Locate the Source of Water Damage:
The first and most important thing that you will need to do is locate the source of water damage. You must know from exactly the water is coming in to prevent the damage.
In case if it is not a terrible rainfall or drastic flood then it could be essentially hard to do so but you must stay persistent and vigilant.
For sure, you cannot possibly evaluate and locate the problem correctly as a professional would do but you can at least try your luck.
Water damage could come from anywhere, you need to hunt for the most visible and crucial signs. For instance, if you see the damage on ceilings or walls it could be possible that the source of water could be on the roof.
However, if the state initiates from room or bathrooms it could be due to a burst pipe in there.
Stay vigilant and inspect thoroughly.
2. Shut of All the Electronic Devices:
Moving forward, another crucial step that you need to take is to disconnect all the electronic devices that you have in your house.
While you might not be aware of the severity of the damage caused by the water, you must realize that any electronic equipment operating in such situations can lead to deadly electrical shocks and even explosions.
You might never know what damage water might inflict on what electronic device therefore we would always recommend you to turn them all of in case of severe damage.
Hence, don’t be careless and unplug all the electronic devices immediately. It is extremely important to be extra vigilant in terms of electronics and gas lines.
Another thing that you need to take care of in such a situation is to also turn off the other sources of water. It will only add to more water damage around the house.
3. Move Things Away From the Affected Area:
Let’s move forward to another important tip that you can do in case of water damage and it is to immediately move things away from the affected area.
Whether it is furniture, electronic equipment, appliances, clothes, etc you need to try and move them all away from the affected area to protect further damage to your contents.
If you let them sit in the water for long, it would cause severe damage to their surfaces which might be irreversible and could lead to complete replacement of the equipment.
In case of heavy furniture, you might need to call in for urgent help from around your surrounding until the water damage removal service takes charge.
4. Be Safe and Inspect for Mold:
Certain types of mold stains are deadly and can pose serious health hazards for a human being. It is not unlikely for mold to develop in areas facing water damage.
Once infected, the mold can spread at a very fast pace throughout the area so it is always recommended to inspect the situation thoroughly to avoid various health hazards.
If the invasion is not something serious then there is no need to call for professional help.
However, if the invasion is of a significantly large level then you need to immediately shut down any airflow to avoid further contamination and call in for a mold inspection service.
Due to water damage, mold can also infect areas like inside the walls or floors so you need to be vigilant with your mold inspection throughout the water damage removal process.
5. Get Rid of the Water:
Another way to go for water damage removal is to remove the water altogether.
After you have located the source and shut the water off, you need to get rid of the standing water.
Again, if the water content is not large and it has affected a smaller portion then you can easily get rid of it, however, if the water content and damage is significantly large then you might need to call in for a professional water damage removal.
6. Dry It Out With the Air:
Last but not least, if you suspect no signs of mold invasion then you need to dry the surface as soon as possible.
While you wait for your professional water damage removal company, you can seek help from your fans and humidifier to dry the surface with air.
Final Thoughts:
If you follow the above-mentioned tips you will be able to decrease the damage as you wait for your water damage removal near y